Payment & Shipping Terms:
|COLOR:||READ||Material ::||Ductile Cast Iron|
|PUMP Type::||Horizontal||USE:||FIRE FIGHTING|
diesel pump fire fighting,
diesel water pump set
UL Listed Red Color Split Case Fire Water Pump Ductile Cast Iron Material
How it Works
The most common split case pump is a single-stage, between bearing, non-self-priming centrifugal volute pump.
The design of the pump allows for easy removal of the pump’s top casing to enable easy access to the pump’s components without interfering with the motor or the piping system.
The independent bearing casing allows for easy maintenance without the need for removing the pump’s top casing. The pump’s double volute design minimizes the radial load on the shaft, increasing component life and reducing vibrations to provide a quiet operation.
The split case pump is available in various designs and manufactured from different materials to suit a wide range of applications. Major components in the pump such as, impellers, casings, wear rings, and shafts can be offered by manufacturers in various materials to suit the fluid hat is being pumped and the site environment conditions.
The pump also comes in a variety of configurations and designs including horizontal, vertical, vertical open shaft and close coupled configurations; with counter clockwise or clockwise rotation design options.
Precision balancing of all factors in the design of CNP NMFIRE horizontal split case fire pump provide mechanical dependability, efficient operation and minimal maintenance. Simplicity of design ensures long efficient unit life, reduced maintenance costs and minimum power consumption.
Split case fire pumps are specifically designed and tested for fire service application around the world including:
Office buildings, hospitals, airports, manufacturing facilities, warehouses, power stations, oil and gas industry, schools/colleges, hotels, etc.
Standards: NFPA20, UL, FM, EN12845,GB6245
UL : Q: 500-4000GPM H:100-190PSI
FM: Q: 500-4000GPM H:100-190PSI
CCCF: Q:20-500L/S H:0.42-2.0Mpa
NFPA20: Q: 300-8000GPM H:60-300PSI
|Before quotation,we need some basic information for selection & supply Scope :|
|1:Parameters including head ,flow, altitude, temperature, voltage, frequency
(A deduction of 3 % from engine horsepower rating at standard SAE conditions shall be made for diesel engines for each 1000ft(305m) altitude above ft.(91.4m) engine horsepower rating as corrected to standard SAE conditions
shall be made for diesel engines for every 10°F(5.6℃)above 77°F(25 ℃)ambient temperature.)
|2. Scope of supply|
|3. Special requirements (Brand requirement/ technical requirements on product function…)|
|4.Listed or Non-listed products ?|
Contact Person: Kathy Wong