Payment & Shipping Terms:
|Certification::||UL / FM||Standard::||NFPA 20|
|Color::||Red||Delievery Time::||60 Days|
diesel pump fire fighting,
diesel water pump set
2 Stage FM Approved Vertical Turbine Fire Pump Set With Electric Motor Driver
These pumps are helpful in areas where water is scarce, but also when installing an above-ground water storage tank is not desirable. An added advantage to a vertical turbine pump is that almost any length and discharge pressure of the pump can be ordered.
Several impellers can be added for additional pressure. When properly installed, there is no longer a concern about air in the suction pipe, or any of the priming concerns. With each additional impeller added, you are adding to the pump “churn” or shut-off point on its curve, so additional unwanted pressure is often seen at lower operational flows.
The VTP pump line is normally designed to operate in wells or sumps. Its bowl assembly consists primarily of a suction case or bell, one or more pump bowls and a discharge case. The pump bowl assembly is positioned in the sump or well at a depth to provide the proper submergence.
Applications :Deep well, irrigation, sumps, condensate, can pump requirements, fire service, municipal, industrial
|Before quotation,we need some basic information for selection & supply Scope :|
|1:Parameters including head ,flow, altitude, temperature, voltage, frequency
(A deduction of 3 % from engine horsepower rating at standard SAE conditions shall be made for diesel engines for each 1000ft(305m) altitude above ft.(91.4m) engine horsepower rating as corrected to standard SAE conditions
shall be made for diesel engines for every 10°F(5.6℃)above 77°F(25 ℃)ambient temperature.)
|2. Scope of supply|
|3. Special requirements (Brand requirement/ technical requirements on product function…)|
|4.Listed or Non-listed products ?|
Contact Person: Kathy Wong