Payment & Shipping Terms:
|Capacity:||2500 GPM||Pressure:||150 Meters|
|Speed:||2000 RPM||Structure:||Single-stage Pump|
|Warranty:||18 Months||Material:||Cast Iron/Stinless Steel|
2500GPM Fire Fighting Water Pump,
Fire Fighting Water Pump UL,
2500GP Split Case Fire Pump
NM FIRE 2500 GPM Fire Fighting Water Pump Split Case Fire Pump UL Listed
UL/FM Fire Pump Performance Requirements:
The maximum net pressure for a fire pump shall not exceed 140 percent of rated head.
( Hs ≤ 140% x H)
Inlet pressure less than 047.7 kpa. A pump shall develop not less than 65 percent or rated
total head when discharging at 1-1/2 times rated. (H 1.5 Q ≥ H x 65%)
A test is to be conducted with a positive suction pressure sufficient to achieve the maximum
brake-horsepower(KW input)required by the pump. ( P ≥ BHP)
The shut off head shall not be less than 99% of the maximum head.
|Rated Flow:||2500 GPM|
|Rated Head:||150 M|
|Engine:||NM Fire NM8-128|
|Control Panel:||Tornatech GPD24-120-220|
Why NMFIRE pump BHP is smaller?
1:Best Hydraulic design
The Max. BHP point of new generation SCF pump is mostly near the maximum efficiency point
(near the 150% of Rated Flow point), while the Max. BHP of our competitors are mostly at 160%
to 170% of Rated Flow. So their matching power is mostly higher than ours.
2: High efficiency, reduce the matching power again.
3:Pump cavitation performance is very good, to ensure that the small size pump can be used for
big flow rate.
|1. Reply within 24 hours.|
|2. High-quality products and the most reasonable price|
|3. Data and chemical technology support.|
|4. Professional team service|
|5. Customiszed production for different package|
|6. No delay on shipment|
Contact Person: Kathy Wong