Payment & Shipping Terms:
diesel driven fire water pumps,
diesel pump fire fighting
2000 GMP Double Suction Diesel Engine Fire Pump Set With UL / FM Certificates Be accordance with NFPA 20
|Pump||NM Fire Split Case|
|Rated Flow:||2000 usgpm|
|Fuel tank||NM Fire 1000L single wall|
|Jockey pump||CNP CDL12-9|
Horizontal Split Case (HSC) pumps are given their name due to the “split”” design of the casing, where the casing cover can be lifted off of the pump to expose the internal components.
These components include the impeller, bearings, pump shaft, and so on. HSC pumps have two bearings, located on either side of the impeller, which are useful to withstand the large amount of vibration and thrust forces often caused by water turbulence in the suction piping.
The pump casings are often designed to handle higher working pressures, and are often heavier. The durability of the HSC design allows the pump to be used for very large water flows – often in excess of 5000 GPM.
It should be noted that an HSC pump is not always mounted horizontally, it is possible to have the same durability design features and have the pump designed to be mounted vertically.
First-Class international technical standards.
First-Class testing and inspection equipment.
|Before quotation,we need some basic information for selection & supply Scope :|
|1:Parameters including head ,flow, altitude, temperature, voltage, frequency
(A deduction of 3 % from engine horsepower rating at standard SAE conditions shall be made for diesel engines for each 1000ft(305m) altitude above ft.(91.4m) engine horsepower rating as corrected to standard SAE conditions
shall be made for diesel engines for every 10°F(5.6℃)above 77°F(25 ℃)ambient temperature.)
|2. Scope of supply|
|3. Special requirements (Brand requirement/ technical requirements on product function…)|
|4.Listed or Non-listed products ?|
Contact Person: Kathy Wong